Modbus Registers - Datcon DT4220 E Series Operating Instructions Manual

DT4220 E

10.2. MODBUS registers

These registers are read only.
MODBUS address:
1000
1002
1003
1004
1005
1006
20180619-V0
I32 Displayed value: 32 bit, signed, integer.
This value is without reference to the place of decimal point.
U16 Number of decimal character (0-4).
U16 Error (0 = no error, 1 = repearing must be carried out in
service, 4 = the input signal is out of the specificed ranges).
I16 Not used.
U16 Limit1 output: 1 = ON, 0 = OFF
U16 Limit2 output: 1 = ON, 0 = OFF
55