Bowflex LateralX LX5 Service Manual page 97

20. Put the new Left Mid Pedal Arm on the Crank and push it on by hand,
wiggling it until it goes on as far as possible.
Mid Pedal Arm
21. Finger tighten the screw and washer to attach the Mid Pedal Arm.
Using the appropriate tool, tighten the hardware to secure the Mid Pedal
Arm to the Crank.
or
Install the Endcap.
22. Install the indicated screw and nut:
LX3/LX3i—move the Swing Arm end into the Mid Pedal Arm bracket.
Using two 8" or longer adjustable wrenches (or 24mm or 15/16" socket
nut.
LX5/LX5i—move the Adjustable Arm to engage the Mid Pedal Arm
bracket. Using an 24mm or 15/16" socket wrench (inside of arm) and
24mm or 15/16" open end wrench or adjustable wrench (outside of arm),
install the indicated screw and nut.
Completely tighten the nut, or torque to 120 Nm (89 ft-lb).
23. Repeat steps20-22 for the Right Mid Pedal Arm.
97