Bowflex LateralX LX5 Service Manual page 121

Disconnect all power to the machine before you service it.
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving
these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
This procedure requires removal of the Mid Pedal Arm. This arm cannot be re-used once it is removed. Make sure to have a
replacement Mid Pedal Arm available before attempting the procedure.
Note:Your machine may not match the image. For reference only.
from the Handlebar Arms and Handlebar Links.
Be aware that the Handlebar Arm will be loose and will pivot
when the hardware is removed. Safely allow the Handlebar
Arm to pivot downward and come to rest. Be sure to stay out
of the path of the Handlebar Arm.
2. Remove the Pivot Bolt Covers from the Handlebar
hardware. Set them safely aside.
3. Remove the Handlebar Arms and Wave Washers. Set them safely
aside.
NOTICE: Do not allow the wave washer to fall down into the
Engine Assembly. This step may require two people.
121