Bowflex LateralX LX5 Service Manual page 95

13. Using a #2 Phillips screwdriver, remove the 5 indicated screws from
the Right Lower Shroud. Carefully remove the old Right Lower Shroud
and set it safely aside.
If you are only replacing the Right Lower Shroud, go to step 18.
If you are replacing the Left Lower Shroud, continue to step 14.
14. Using a 17mm open end wrench, loosen and remove the indicated nut
from the Left Lower Shroud. Carefully pull the Power Inlet plug out of the
hole toward the inside of the Shroud.
15. Using a #2 Phillips screwdriver, remove the 5 indicated screws from
the Left Lower Shroud. Carefully remove the old Left Lower Shroud and
set it safely aside.
95