Bowflex LateralX LX5 Service Manual page 36

3. Using a #2 Phillips screwdriver, remove the 2 screws from the Adjust-
able Arm Shroud.
Note: Mid Pedal Arm bracket not shown.
the push fasteners. Carefully remove the outer Adjustable Arm Shroud.
NOTICE: Pull mainly on the outer Shroud to avoid damage to the
inner Shroud and the electronic parts in it.
If you are only replacing the outer Shroud, go to step 8.
If you are replacing the inner Shroud, continue to step 5.
5. Using a #2 Phillips screwdriver, loosen and remove the 2 indicated
screws from the Adjustable Arm. Set the screws safely aside.
NOTICE: Hold the inner Shroud as you loosen the screws so that
it does not fall.
6. Carefully turn and remove the inner Adjustable Arm Shroud, and set it
safely aside.
NOTICE: Be sure to avoid damage to the electronic parts.
7. Carefully move the new inner Adjustable Arm Shroud into position and
align it with the screw holes on the Adjustable Arm. Install the new Adjust-
able Arm Shroud to the Adjustable Arm assembly with the screws. Use a
NOTICE: Be sure to avoid damage to the electronic parts.
36