Bowflex LateralX LX5 Service Manual page 58

25. Using a Phillips screwdriver, attach the Left Lower Shroud, to the main
frame. First, lock the screw in position A, then lock the screw in position B,
and then tighten the screws in the other positions.
A
M4 x 40
M5 x 40
B
26. Insert the Power Inlet cable connector into the Left Lower Shroud.
Using a 17mm wrench, tighten the nut to secure the power cable
connector.
27. Align the Right Lower Shroud with the push fasteners on the Left
Lower Shroud and move the Right Lower Shroud into position. Push the
Shrouds together so that the Push Fasteners are fully seated.
58