Bowflex LateralX LX5 Service Manual page 73

37. Insert the Power Inlet cable connector into the Left Lower Shroud.
Using a 17mm wrench, tighten the nut to secure the power cable
connector.
38. Align the Right Lower Shroud with the push fasteners on the Left
Lower Shroud and move the Right Lower Shroud into position. Push the
Shrouds together so that the Push Fasteners are fully seated.
39. Install the Lower Shroud to the Frame Assembly with the screws.
Using a Phillips screwdriver, fully tighten the screw in position A, then fully
tighten the screw in position B, and then tighten the screws in the other
positions.
40. Using a #2 Phillips screwdriver, re-install the
Crank Shrouds.
M4 x 40
M5 x 40
B
73
A