16. Using a Phillips screwdriver, attach the new Left Lower Shroud to the
main frame. First, tighten the screw in position A, then tighten the screw in
position B, and then tighten the screws in the other positions.
17. Insert the Power Inlet cable connector into the Left Lower Shroud.
Using a 17mm wrench, tighten the nut to secure the power cable
connector.
18. Align the new Right Lower Shroud with the push fasteners on the Left
Lower Shroud and move the Right Lower Shroud into position. Push the
Shrouds together so that the Push Fasteners are fully seated.
19. Install the new Lower Shroud to the Frame Assembly with the screws.
Use a Phillips screwdriver to tighten the screw in position A, then tighten
the screw in position B, and then tighten the screws in the other positions.
A
M4 x 40
M5 x 40
B
96
M4 x 40
M5 x 40
B
A