Bowflex LateralX LX5 Service Manual page 68

16. Slowly turn the Crank Assembly backward and carefully ease the
Right Drive Belt off the Crank pulley to the outside.
the Crank pulley.
17. Remove the old Right Drive Belt and set it safely aside.
If you are only replacing the Right Drive Belt, go to step 34.
18. Carefully disconnect the Lower Data Cable from the Servo Motor wire.
NOTICE: Do not crimp the cables.
Servo Motor wire
Speed/Direction
Sensor wire
Servo Motor
Power wire
68
Crank
pulley
Right
drive belt
Lower Data Cable
Flywheel cable