5.25 inch motherboard intel atom processor, vga/lvds dual display, quad gbe, eight usb 2,0, two sata 3 gb/s, two pcle mini, pci, pci-104,rohs (194 pages)
Intel socket479 motherboard supporting intel pentium m and celeron m processors and both vga and dual lvds graphics output with dual pcie gbe, usb 2.0, sata and audio (266 pages)
NOVA-GM45A Motherboard IEI Technology Corp. MODEL: NOVA-GM45A 5.25" Socket P Motherboard with PC/104+, PCIe Mini Card Slot, PCI Slot Dual PCIe GbE, 4 x SATA, 6 x Serial Ports User Manual Page i Rev. 1.00 – 9 March, 2010...
Page 2
NOVA-GM45A Motherboard Revision Date Version Changes 9 March, 2010 1.00 Initial release Page ii...
Page 3
NOVA-GM45A Motherboard Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Page 12
NOVA-GM45A Motherboard BIOS Menus BIOS Menu 1: Main ........................86 BIOS Menu 2: Advanced ......................88 BIOS Menu 3: CPU Configuration ....................88 BIOS Menu 4: IDE Configuration....................89 BIOS Menu 5: IDE Master and IDE Slave Configuration ............91 BIOS Menu 6: Super IO Configuration..................95 BIOS Menu 7: Hardware Health Configuration ...............
Video outputs include HDMI, VGA, SDVO and LVDS. The LVDS connector is for use when the NOVA-GM45A is installed in a panel PC or other device with a built-in monitor. The VGA and HDMI connectors provide optional external video output. The SDVO port is available for custom applications if needed.
NOVA-GM45A Motherboard 1.2 Connectors The connectors on the NOVA-GM45A are shown in the figure below. Figure 1-2: Connectors 1.3 Dimensions The dimensions of the board are listed below: Length: 146 mm Width: 203 mm Page 3...
NOVA-GM45A Motherboard 1.4 Data Flow F igure 1-5 shows the data flow between the two on-board chipsets and other components installed on the motherboard and described in the following sections of this chapter. Figure 1-5: Data Flow Block Diagram Page 5...
NOVA-GM45A Motherboard 1.5 Technical Specifications NOVA-GM45A technical specifications are listed in table below. Specification NOVA-GM45A 5.25" Form Factor Socket P Socket 45 nm Socket P Intel® Core™2 Duo processor CPU Supported 45 nm Socket P Intel® Celeron® M processor Front Side Bus (FSB)
NOVA-GM45A Motherboard Specification NOVA-GM45A Storage Serial ATA 4 x SATA (3 Gb/s) Environmental and Power Specifications Power Supply 12 V Power Consumption 5.76 A@12 V (2.26 GHz Intel Core2 Quad Q9100 with 1066 MHz FSB and 2 x 2 GB 800 MHz DDR2 running...
Only handle the edges of the PCB:- Don't touch the surface of the motherboard. Hold the motherboard by the edges when handling. 2.2 Unpacking Precautions When the NOVA-GM45A is unpacked, please do the following: Follow the antistatic guidelines above.
If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the NOVA-GM45A was purchased from or contact an IEI sales representative directly by sending an email to ales@iei.com.tw.
NOVA-GM45A Motherboard Quantity Item and Part Number Image Mini jumper pack (2.0mm) (P/N: 33100-000033-RS) Utility CD Quick Installation Guide Table 2-1: Packing List The following optional items are also available. Item and Part Number Image Dual USB cable with bracket...
NOVA-GM45A Motherboard Item and Part Number Image CPU cooler (P/N: CF-479F-RS) SATA to IDE/CompactFlash® converter board (P/N: SAIDE-KIT01-R10) PCIe Mini Wireless card (PCIe interface) (P/N: WMPCIE-V01-R10) PCIe Mini Wireless card (USB interface) (P/N: WMUSB-V01-R10) Parallel port cable (P/N: 32200-015100-RS) Table 2-2: Optional Items...
NOVA-GM45A Motherboard 3.1 Peripheral Interface Connectors This chapter details all the jumpers and connectors. 3.1.1 Layout The figures below show all the connectors and jumpers. Figure 3-1: Connector and Jumper Locations Page 14...
NOVA-GM45A Motherboard 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board. Connector Type Label Audio connector 10-pin box header AUDIO1 ATX power control connector 3-pin wafer ATXCTL1 Battery connector 2-pin wafer BAT1 Digital I/O connector...
NOVA-GM45A Motherboard Figure 3-3: ATX Power Control Connector Location Description 5VSB PS-ON Table 3-4: ATX Power Control Connector Pinouts 3.2.3 Battery Connector CN Label: BAT1 CN Type: 2-pin wafer (1x2) CN Location: See Figure 3-4 See Table 3-5 CN Pinouts: This is connected to the system battery.
NOVA-GM45A Motherboard The memory slot is for connecting memory to the system. Figure 3-6: DIMM Connector 3.2.6 Fan Connector CN Label: CPU_FAN1 CN Type: 4-pin header CN Location: See Figure 3-7 CN Pinouts: See Table 3-7 The fan connector attaches to a cooling fan.
NOVA-GM45A Motherboard Figure 3-7: Fan Connector Location Description Ground +12 V CPUFANIN CPUFANOUT Table 3-7: Fan Connector Pinouts 3.2.7 Fan Connector CN Label: FAN1 CN Type: 3-pin wafer (1x3) F igure 3-8 CN Location: T able 3-8 CN Pinouts: Connects to the system fan.
NOVA-GM45A Motherboard Figure 3-8: Fan Connector Locations Description SYSFANIN0 +12V Table 3-8: Fan Connector Pinouts 3.2.8 Front Panel Connector CN Label: F_PANEL1 8-pin header (2x4) CN Type: CN Location: See Figure 3-9 CN Pinouts: See Table 3-9 The front panel connector connects to the indicator LEDs and buttons on the computer's front panel.
3.2.10 LVDS Backlight Connector CN Label: INVERTER1 CN Type: 5-pin wafer (1x5) See Figure 3-11 CN Location: See Table 3-11 CN Pinouts: The backlight inverter connector provides the backlight on the LCD display connected to the NOVA-GM45A with +12V of power. Page 25...
NOVA-GM45A Motherboard CN Location: See Figure 3-13 CN Pinouts: See Table 3-13 The parallel port connector connects to a parallel port connector interface or some other parallel port device such as a printer. Figure 3-13: Parallel Port Connector Location Description...
NOVA-GM45A Motherboard CN Pinouts: See Table 3-15 The PCI-104 connector is for installing a PCI-104 expansion card. Figure 3-15: PCI-104 Connector Location Row A Row B Row C Row D GND/5 V TBD1 AD00 VI/O1 AD02 AD01 +5 V AD05...
NOVA-GM45A Motherboard Row A Row B Row C Row D AD24 C/BE3# VI/O1 IDSEL3 AD26 AD25 AD29 +5 V AD28 AD27 +5 V AD30 AD31 REQ0# REQ1# VI/O2 REQ2# +5 V GNT0# GNT1# VI/O3 GNT2# +5 V CLK0 CLK1 CLK2...
NOVA-GM45A Motherboard Figure 3-16: PCI Slot Location Description Description TRST -12 V +12 V +5 V +5 V INTA +5 V INTC INTB +5 V INTD RESERVED3 PRSNT1 +5 V RESERVED1 RESERVED4 PRSNT2 3.3 V_AUX RESERVED2 +5 V Page 33...
Page 46
NOVA-GM45A Motherboard Description Description +5 V AD30 AD31 +3.3 V AD29 AD28 AD26 AD27 AD25 AD24 +3.3 V IDSEL C/BE3 +3.3 V AD23 AD22 AD20 AD21 AD19 AD18 +3.3 V AD16 AD17 +3.3 V C/BE2 FRAME IRDY TRDY +3.3 V...
NOVA-GM45A Motherboard Description Description C/BE0 +3.3 V +3.3 V +5 V +5 V REQ64 ACK64 +5 V +5 V +5 V +5 V Table 3-16: PCI Slot 3.2.16 PCIe Mini Card Slot CN Label: CN Type: 52-pin PCIe Mini Card Slot...
NOVA-GM45A Motherboard CN Location: See Figure 3-18 CN Pinouts: See Table 3-18 Connects to a molex power connector from the power supply unit. Figure 3-18: Power Connector Location Description +12 V Table 3-18: Power Connector Pinouts 3.2.18 Programming Port for LC4064...
NOVA-GM45A Motherboard Figure 3-19: Programming Port Location Description Description VCC3 Table 3-19: Programming Port Pinouts 3.2.19 SATA Drive Connectors CN Label: SATA1, SATA2, SATA3, SATA4 CN Type: 7-pin SATA drive connectors F igure 3-20 CN Location: T able 3-20 CN Pinouts: The two SATA II drive connectors are each connected to a SATA II drive.
NOVA-GM45A Motherboard Figure 3-20: SATA Drive Connector Locations Description Table 3-20: SATA Drive Connector Pinouts 3.2.20 SATA Power Connector CN Label: CN2, CN3 CN Type: 4-pin wafer (1x4) See Figure 3-21 CN Location: See Table 3-21 CN Pinouts: The 5V Power Connector provides +5V power output to the SATA connector.
NOVA-GM45A Motherboard Figure 3-21: 5V Power Connector Locations Description +12V Table 3-21: 5V Power Connector Pinouts 3.2.21 SDVO Connector CN Label: CN17 CN Type: 45-pin flat ribbon cable connector CN Location: See Figure 3-27 See Table 3-27 CN Pinouts: The SDVO port is for system expansion. Primarily designed for graphics, it is also programmable to perform other functions.
NOVA-GM45A Motherboard Description Description DATA CARRIER DETECT (DCD2) DATA SET READY (DSR2) RECEIVE DATA (RXD2) REQUEST TO SEND (RTS2) TRANSMIT DATA (TXD2) CLEAR TO SEND (CTS2) DATA TERMINAL READY (DTR2) RING INDICATOR (RI2) DATA CARRIER DETECT (DCD3) DATA SET READY (DSR3)
NOVA-GM45A Motherboard Figure 3-25: SPI ROM Connector Location Description Description Table 3-25: SPI ROM Connector Pinouts 3.2.25 USB Connectors CN Label: USB01, USB23, USB45 and USB67 CN Type: 8-pin header (2x4) CN Location: See Figure 3-26 CN Pinouts: See Table 3-26 The USB connectors connect to USB devices.
NOVA-GM45A Motherboard 3.3.1 HDMI Connector CN Label: HDMI1 HDMI type A connector CN Type: F igure 3-28 CN Location: CN Pinouts: See Table 3-28 The HDMI (High-Definition Multimedia Interface) connector connects to digital audio or video sources. Description Description DATA2+...
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the NOVA-GM45A. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the NOVA-GM45A, or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
NOVA-GM45A is installed. All installation notices pertaining to the installation of the NOVA-GM45A should be strictly adhered to. Failing to adhere to these precautions may lead to severe damage of the NOVA-GM45A and injury to the person installing the motherboard. WARNING:...
USB devices 4.3 Unpacking When the NOVA-GM45A is unpacked, please check all the unpacking list items listed in Chapter 3 are indeed present. If any of the unpacking list items are not available please contact the NOVA-GM45A vendor reseller/vendor where the NOVA-GM45A was purchased or contact an IEI sales representative.
To install a socket P CPU onto the NOVA-GM45A, follow the steps below: WARNING: When handling the CPU, only hold it on the sides. DO NOT touch the pins at the bottom of the CPU.
NOVA-GM45A Motherboard Figure 4-1: Make sure the CPU socket retention screw is unlocked Step 2: Inspect the CPU socket. Make sure there are no bent pins and make sure the socket contacts are free of foreign material. If any debris is found, remove it with compressed air.
NOVA-GM45A Motherboard Figure 4-2: Lock the CPU Socket Retention Screw 4.5 Cooling Kit Installation An IEI Socket P CPU cooling kit can be purchased separately. (See Chapter 3) The cooling kit comprises a CPU heat sink and a cooling fan.
Step 4: Connect the fan cable. Connect the cooling kit fan cable to the fan connector on the NOVA-GM45A. Carefully route the cable and avoid heat generating chips and fan blades.Step 0: 4.6 SO-DIMM Installation To install an SO-DIMM, please follow the steps below and refer to Figure 4-4.
NOVA-GM45A Motherboard Figure 4-4: SO-DIMM Installation Step 1: Locate the SO-DIMM socket. Place the board on an anti-static mat. Step 2: Align the SO-DIMM with the socket. Align the notch on the memory with the notch on the memory socket.
NOVA-GM45A Motherboard Before the NOVA-GM45A is installed in the system, the jumpers must be set in accordance with the desired configuration. The jumpers on the NOVA-GM45A are listed in T able 4-1. Description Label Type AT Power Mode Setting ATXCTL1...
F igure 4-6 Jumper Location: If the NOVA-GM45A fails to boot due to improper BIOS settings, the clear CMOS jumper clears the CMOS data and resets the system BIOS information. To do this, use the jumper cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1 and 2.
NOVA-GM45A Motherboard Load Optimal Defaults Load Failsafe Defaults. After having done one of the above, save the changes and exit the CMOS Setup menu. The clear CMOS jumper settings are shown in T able 4-3. Description Keep CMOS Setup...
NOVA-GM45A Motherboard Figure 4-8: COM6 Mode Setting Jumper Location 4.7.5 LVDS Panel Resolution Jumper Jumper Label: Jumper Type: 8-pin header Jumper Settings: See Table 4-6 See Figure 4-9 Jumper Location: The LVDS Panel Resolution jumper allows the resolution of the LVDS screens connected to the LVDS1 connector to be configured.
Figure 4-9: LVDS Panel Resolution Jumper Pinout Locations 4.7.6 LVDS Voltage Selection WARNING: Permanent damage to the screen and NOVA-GM45A may occur if the wrong voltage is selected with this jumper. Please refer to the user guide that cam with the monitor to select the correct voltage.
NOVA-GM45A Motherboard The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set. The jumper sets the voltage connected to LVDS1. The LVDS Voltage Selection jumper settings are shown in Table 4-7. Description +3.3V Table 4-7: LVDS Voltage Selection Jumper Settings The LVDS Voltage Selection jumper location is shown in Figure 4-10.
The NOVA-GM45A must be installed in a chassis with ventilation holes on the sides allowing airflow to travel through the heat sink surface. In a system with an individual power supply unit, the cooling fan of a power supply can also help generate airflow through the board surface.
NOVA-GM45A Motherboard 4.9.1 ATX Power Connection Follow the instructions below to connect the NOVA-GM45A to an ATX power supply. WARNING: Disconnect the power supply power cord from its AC power source to prevent a sudden power surge to the NOVA-GM45A.
NOVA-GM45A Motherboard Step 3: Connect the Power Cable to an ATX Power Adapter Cable. Connect one of the 4-pin (1x4) Molex type power cable connectors to a 20-pin ATX power adapter cable. See Figure 4-13. Figure 4-13: Connect Power Cable to ATX Adapter Cable Step 4: Connect ATX Power Adapter Cable to Power Supply.
NOVA-GM45A Motherboard Figure 4-14: Connect ATX Power Adapter Cable to Power Supply Step 5: Connect ATX Power Cable to Motherboard. Connect the 3-pin ATX power connector to the ATX power connector on the motherboard. See Figure 4-15. Step 0: Figure 4-15: Connect ATX Power Cable to Motherboard...
NOVA-GM45A Motherboard 4.9.2 Audio Kit Installation The Audio Kit that came with the NOVA-GM45A connects to the audio connector on the NOVA-GM45A. The audio kit consists of three audio jacks. Mic-in connects to a microphone. Line-in provides a stereo line-level input to connect to the output of an audio device.
Step 3: Insert the cable connectors. Once the cable connector is properly aligned with the 26-pin box-header connector on the NOVA-GM45A, connect the cable connector to the on-board connector. See Figure 4-17. Figure 4-17: LPT Cable Connection Step 4: Attach the LPT connector to the chassis. To secure the LPT interface connector to the chassis please refer to the installation instructions that came with the chassis.
NOVA-GM45A Motherboard Step 5: Connect LPT device. Once the LPT interface connector is connected to the chassis, the LPT device can be connected to the LPT interface connector. See Figure 4-18 Step 0:\ Figure 4-18: Connect the LPT Device 4.9.4 PC/104-Plus Card Installation To install a PC/104-Plus card, please refer to the diagram and instructions below.
0: 4.9.6 RS-232/422/485 Cable with Slot Bracket The NOVA-GM45A is shipped with one RS-232/422/485 serial port connector cable. The dual serial port connector cable connects RS-232 and RS-422/485 connectors to the Page 73...
NOVA-GM45A Motherboard serial port connector on the NOVA-GM45A. Follow the steps below to connect the serial port connector cable. Step 1: Locate the serial port connector. The location of the RS-232/422/485 serial port connector is shown in Chapter 3. Step 2: Align the connectors.
NOVA-GM45A Motherboard Step 2: Insert the cable connector. Press the clip on the connector at the end of the SATA cable and insert the cable connector into the onboard SATA drive connector. See F igure 4-22. Figure 4-22: SATA Drive Cable Connection Step 3: Connect the cable to the SATA disk.
NOVA-GM45A Motherboard Figure 4-23: SATA Power Drive Connection 4.9.8 Four Serial Port Connector The 40-pin serial port connector connects the board connector to four DB-9 connectors. To install, please follow the steps below. Step 1: Locate the COM connector. The locations of the COM port connectors are shown in Chapter 4.
0: Figure 4-25: Serial Device Connector 4.9.9 USB Cable (Dual Port without Bracket) The NOVA-GM45A is shipped with a dual port USB 2.0 cable. To connect the USB cable connector, please follow the steps below. Step 1: Locate the connectors. The locations of the USB connectors are shown in Chapter 3.
To install the external cables, please follow the steps outlined in the sections below. 4.10.1 HDMI Connection The HDMI connector transmits a digital signal to compatible HDMI display devices such as a TV or computer screen. To connect the HDMI cable to the NOVA-GM45A, follow the steps below. Step 1: Locate the HDMI connector.
NOVA-GM45A Motherboard Step 2: Align the connector. Align the HDMI connector with the HDMI port. Make sure the orientation of the connector is correct. Figure 4-27: HDMI Connection Step 3: Insert the HDMI connector. Gently insert the HDMI connector. The connector should engage with a gentle push.
RJ-45 connector into the onboard RJ-45 connector. Step 0: 4.11 Software Installation All the drivers for the NOVA-GM45A are on the CD that came with the system. To install the drivers, please follow the steps below. Step 1: Insert the CD into a CD drive connected to the system.
NOVA-GM45A Motherboard Figure 4-29: Introduction Screen Step 3: Click NOVA-GM45A. Step 4: A new screen with a list of available drivers appears (Figure 4-30). Page 81...
NOVA-GM45A Motherboard 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 5.1.1 Starting Setup The AMI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways.
NOVA-GM45A Motherboard Function F2 /F3 key Change color from total 16 colors. F2 to select color forward. F10 key Save all the CMOS changes, only for Main Menu Table 5-1: BIOS Navigation Keys 5.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears.
NOVA-GM45A Motherboard 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit...
NOVA-GM45A Motherboard The System Overview field also has two user configurable fields: System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year.
NOVA-GM45A Motherboard BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Advanced Settings Configure CPU WARNING: Setting wrong values in below sections may cause system to malfunction > CPU Configuration > IDE Configuration Select Screen > SuperIO Configuration ...
NOVA-GM45A Motherboard Frequency: Lists the CPU processing speed FSB Speed: Lists the FSB speed Cache L1: Lists the CPU L1 cache size Cache L2: Lists the CPU L2 cache size 5.3.2 IDE Configuration Use the IDE Configuration menu (BIOS Menu 4) to change and/or set the configuration of the IDE devices installed in the system.
NOVA-GM45A Motherboard Enhanced Configures the on-board ATA/IDE controller to be in Enhanced mode. In this mode, IDE channels and SATA channels are separated. This mode supports up to 6 storage devices. Some legacy OS do not support this mode.
NOVA-GM45A Motherboard BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Primary IDE Master Select the type of device connected to the system Device :Not Detected Type [Auto] LBA/Large Mode [Auto] Block (Multi-Sector Transfer) [Auto] Select Screen...
Page 104
NOVA-GM45A Motherboard 32Bit Data Transfer: Enables 32-bit data transfer. Type [Auto] Use the Type BIOS option select the type of device the AMIBIOS attempts to boot from after the Power-On Self-Test (POST) is complete. Not Installed BIOS is prevented from searching for an IDE disk drive on the specified channel.
Page 105
NOVA-GM45A Motherboard Block (Multi Sector Transfer) [Auto] Use the Block (Multi Sector Transfer) to disable or enable BIOS to auto detect if the device supports multi-sector transfers. Disabled BIOS is prevented from using Multi-Sector Transfer on the specified channel. The data to and from the device occurs one sector at a time.
Page 106
NOVA-GM45A Motherboard Auto BIOS auto detects the DMA mode. Use this value if the IDE EFAULT disk drive support cannot be determined. Single Word DMA mode 0 selected with a maximum data SWDMA0 transfer rate of 2.1 MB/s ...
NOVA-GM45A Motherboard S.M.A.R.T [Auto] Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts impending drive failures. The S.M.A.R.T BIOS option enables or disables this function.
Page 108
NOVA-GM45A Motherboard Serial Port1 Address [3F8/IRQ4] Use the Serial Port1 Address option to select the Serial Port 1 base address. Port 1 disabled Disabled 3F8/IRQ4 I/O address 3F8 and interrupt address IRQ4 EFAULT 3E8/IRQ4 I/O address 3E8 and interrupt address IRQ4 ...
Page 109
NOVA-GM45A Motherboard Bi-directional Parallel port outputs are 8-bits long. Inputs are accomplished by reading 4 of the 8 bits on the status register. The parallel port operates in the enhanced parallel port mode (EPP). The EPP mode supports...
Page 110
NOVA-GM45A Motherboard Serial Port3 IRQ [10] Use the Serial Port3 IRQ option to select the interrupt address for serial port 3. Interrupt address 10 EFAULT Serial Port4 Address [2E8] Use the Serial Port4 Address option to select the base addresses for serial port 4 ...
Page 111
NOVA-GM45A Motherboard Serial Port6 Address [2E0] Use the Serial Port6 Address option to select the base addresses for serial port 6 No I/O address Disabled I/O address 3E8 I/O address 2E8 I/O address 2F0 ...
NOVA-GM45A Motherboard 5.3.4 Hardware Health Configuration The Hardware Health Configuration menu (BIOS Menu 7) shows the operating temperature, fan speeds and system voltages. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Hardware Health Event Monitoring Fan configuration ...
Page 113
NOVA-GM45A Motherboard PWM Manually Mode The fan spins at the set speed, max speed is at 255, full-off is at 0. CPU Temperature Limit of OFF [000] WARNING: CPU failure can result if this value is set too high because the fan will...
NOVA-GM45A Motherboard Slope PWM [0.5 PWM] Sets how big each increase in the speed of the fan is. Lower settings mean finer tuning of the fan speed. Higher settings mean bigger jumps in speed as the fan speed changes.
NOVA-GM45A Motherboard BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit AHCI Port0 Select the type of device connected to the system Device :Not Detected SATA Port0 [Auto] S.M.A.R.T. [Enabled] Select Screen Select Item...
Page 118
NOVA-GM45A Motherboard COM3 System is remotely accessed through COM3 System is remotely accessed through COM4 COM4 NOTE: Make sure the selected COM port is enabled through the Super I/O configuration menu. Base Address, IRQ [3E8h, A] The Base Address, IRQ option cannot be configured and only shows the interrupt address of the serial port listed above.
NOVA-GM45A Motherboard Always Redirection is always active (Some OSes may not EFAULT work if set to Always) Terminal Type [ANSI] Use the Terminal Type BIOS option to specify the remote terminal type. The target terminal type is ANSI...
Page 120
NOVA-GM45A Motherboard USB Devices Enabled The USB Devices Enabled field lists the USB devices that are enabled on the system USB Function [Enabled] Use the USB Function BIOS option to enable or disable USB function support. Disabled USB function support disabled ...
NOVA-GM45A Motherboard 5.3.8 Power Configuration The Power Configuration menu (BIOS Menu 12) allows the advanced power management options to be configured. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Power Supply Status [AT] Select Screen ...
NOVA-GM45A Motherboard BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Advanced PCI/PnP Settings Available: Specified IRQ is available to be used by the PCI/PnP WARNING: Setting wrong values in below sections devices may cause system to malfunction...
Page 123
NOVA-GM45A Motherboard IRQ7 IRQ9 IRQ10 IRQ 11 IRQ 14 IRQ 15 DMA Channel# [Available] Use the DMA Channel# option to assign a specific DMA channel to a particular PCI/PnP device. Available The specified DMA is available to be used by...
NOVA-GM45A Motherboard 5.5 Boot Use the Boot menu to configure system boot options. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Boot Settings Configure settings during system boot. > Boot Settings Configuration > Boot Device Priority > Hard Disk Drives >...
Page 125
NOVA-GM45A Motherboard Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer speed up the boot process. No POST procedures are skipped Disabled Enabled Some POST procedures are skipped to decrease EFAULT the system boot time ...
NOVA-GM45A Motherboard Allows the Number Lock on the keyboard to be enabled EFAULT automatically when the computer system boots up. This allows the immediate use of the 10-key numeric keypad located on the right side of the keyboard. To confirm this, the Number Lock LED light on the keyboard is lit.
NOVA-GM45A Motherboard 5.5.3 Hard Disk Drives Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs. Only installed hard drives are shown. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Hard Disk Drives Specifies the boot ...
NOVA-GM45A Motherboard 5.5.5 CD/DVD Drives Use the CD/DVD Drives menu to specify the boot sequence of the available CD/DVD drives. Only connected drives are shown. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Hard Disk Drives Specifies the boot ...
NOVA-GM45A Motherboard Change Supervisor Password Use the Change Supervisor Password to set or change a supervisor password. The default for this option is Not Installed. If a supervisor password must be installed, select this field and enter the password. After the password has been added, Install appears next to Change Supervisor Password.
NOVA-GM45A Motherboard BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Advanced Chipset Settings WARNING: Setting wrong values in below section may cause system to malfunction. > Northbridge Configuration > Southbridge Configuration Select Screen Select Item...
Page 131
NOVA-GM45A Motherboard ISA expansion card is used, please refer to the documentation that came with the card to see if it is necessary to reserve the space. Disabled Memory is not reserved for ISA expansion cards EFAULT 15 MB – 16 MB...
NOVA-GM45A Motherboard Current Jumper Setting Shows the current resolution setting of the graphics output. 5.7.2 Southbridge Configuration The Southbridge Configuration menu (BIOS Menu 23) the Southbridge chipset to be configured. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset...
NOVA-GM45A Motherboard EMI. This benefit may in some cases be outweighed by problems with timing-critical devices, such as a clock-sensitive SCSI device. Disabled EMI not reduced Enabled EMI reduced EFAULT 5.8 Exit Use the Exit menu (BIOS Menu 24) to load default BIOS values, optimal failsafe values and to save configuration changes.
Page 134
NOVA-GM45A Motherboard Discard Changes Use the Discard Changes option to discard the changes and remain in the BIOS configuration setup program. Load Optimal Defaults Use the Load Optimal Defaults option to load the optimal default values for each of the parameters on the Setup menus.
Page 136
NOVA-GM45A Motherboard Below is a list of BIOS configuration options in the BIOS chapter. System Overview .........................86 System Time [xx:xx:xx] .......................87 System Date [xx/xx/xx] ......................87 SATA Configuration [Compatible] ..................89 Configure SATA as [IDE].....................90 IDE Master and IDE Slave....................90 ...
Page 137
NOVA-GM45A Motherboard SATA Port n [Auto] ......................104 S.M.A.R.T [Enabled]......................104 Remote Access [Disabled]....................105 Serial Port Number [COM1]....................105 Base Address, IRQ [3E8h, A] ................... 106 Serial Port Mode [115200 8,n,1]..................106 ...
Page 140
NOVA-GM45A Motherboard AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface.
Page 141
NOVA-GM45A Motherboard Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly with the system memory. DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module.
Page 142
NOVA-GM45A Motherboard Liquid crystal display (LCD) is a flat, low-power display device that consists of two polarizing plates with a liquid crystal panel in between. LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer.
Page 144
NOVA-GM45A Motherboard NOTE: The following discussion applies to DOS. Contact IEI support or visit the IEI website for drivers for other operating systems. The Watchdog Timer is a hardware-based timer that attempts to restart the system when it stops working. The system may stop working because of external EMI or software bugs.
Page 145
NOVA-GM45A Motherboard NOTE: The Watchdog Timer is activated through software. The software application that activates the Watchdog Timer must also deactivate it when closed. If the Watchdog Timer is not deactivated, the system will automatically restart after the Timer has finished its countdown.
Linux (ubuntu 8.1.0) Linux (openSuSE 11.0) Linux (Fedora 9) D.2 Compatible Processors The following Socket P processors have been successfully tested on the NOVA-GM45A. Model No. Clock Speed Architecture Intel® Core™2 Duo P9500 2.53 GHz 1066 MHz 45 nm Intel®...
The memory modules listed below have been tested on the NOVA-GM45A other memory modules that comply with the specifications may also work on the NOVA-GM45A but have not been tested. The following DDR2 memory modules have been successfully tested on the NOVA-GM45A.
NOVA-GM45A Motherboard E.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
Page 152
NOVA-GM45A Motherboard Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply Assemblies...