Com1 To Com6 Ri Pin Voltage Selection Jumper; Figure 5-11: Com Ri Pin Function Select Jumper Location - IEI Technology NOVA-9102 User Manual

Figure 5-11: COM RI Pin Function Select Jumper Location

5.5.6 COM1 to COM6 RI Pin Voltage Selection Jumper

Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
There are six jumpers to set the voltage of the RI Pin for each of the onboard COM ports.
The RI Pin voltage can be set as a 5.0 V or 12.0 V voltage signal. A list of jumpers, their
corresponding COM port, the connector and the pin number the jumper controls are listed
in the table below.
Jumper COM Port
J_COM_V1 COM1
J_COM_V2 COM2
Page 100
NOVA-9152 and NOVA-9102 5.25" Motherboard
J_COM_V1, J_COM_V2, J_COM_V3, J_COM_V4,
J_COM_V5 and J_COM_V6
3-pin headers
See Table 5-7
See Figure 5-11
Connector
COM1
COM2
Pin No.
Pin 8
Pin 8