Figure 5-7: Clear Cmos Jumper; Table 5-2: Clear Cmos Jumper Settings - IEI Technology NOVA-9102 User Manual

NOVA-9152 and NOVA-9102 5.25" Motherboard
If the NOVA-9152 and NOVA-9102 fails to boot due to improper BIOS settings, the clear
CMOS jumper clears the CMOS data and resets the system BIOS information. To do this,
use the jumper cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip
back to pins 1 and 2.
If the "CMOS Settings Wrong" message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in Table 5-2.
Jumper Select
Short 1 - 2
Short 2 - 3

Table 5-2: Clear CMOS Jumper Settings

The location of the clear CMOS jumper is shown in Figure 5-7 below.

Figure 5-7: Clear CMOS Jumper

Description
Keep CMOS Setup Default
Clear CMOS Setup
Page 95