Parallel Port Cable Without Bracket (Optional); Figure 5-23: Dual Usb Cable Connection - IEI Technology NOVA-9102 User Manual
Intel socket479 motherboard supporting intel pentium m and celeron m processors and both vga and dual lvds graphics output with dual pcie gbe, usb 2.0, sata and audio
Hide thumbs
Also See for NOVA-9102:
- Quick installation manual (16 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
NOVA-9152 and NOVA-9102 5.25" Motherboard
Step 2:
Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the NOVA-9152 and NOVA-9102 USB
connector.
Step 3:
Insert the cable connectors. Once the cable connectors are properly aligned
with the USB connectors on the NOVA-9152 and NOVA-9102, connect the cable
connectors to the on-board connectors. See Figure 5-23.
Figure 5-23: Dual USB Cable Connection
Step 4:
Attach the USB connectors to the chassis. The USB 2.0 connectors each of
two retention screw holes. To secure the connectors to the chassis please refer
to the installation instructions that came with the
5.7.8 Parallel Port Cable without Bracket (Optional)
The optional parallel port (LPT) cable respectively connects the on-board LPT 26-pin box
header to an external LPT device (like a printer). The cable comprises a 26-pin female
header, to be connected to the on-board LPT box-header, on one side and on the other
side a standard external LPT connector. To connect the LPT cable, please follow the
steps below.
Step 1:
Locate the connector. The LPT connector location is shown in Chapter 4.
chassis.Step 0:
Page 115
Advertisement
Table of Contents
