IEI Technology NOVA-9102 User Manual page 186

Boots Graphics Adapter [PCI/IGD]
Use the Boots Graphics Adapter option to select the graphics controller used as the
primary boot device. Select either an integrated graphics controller (IGD) or a combination
of PCI graphics controller, a PCI express (PEG) controller or an IGD. Configuration
options are listed below:
IGD
PCI/IGD
Internal Graphics Mode Select [Enable, 8MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory
that can be used by the Internal graphics device.
Disable
Enable, 1MB
Enable, 8MB
Aperture Size Select/Graphic Win Size [256MB]
Use the Aperture Size Select/Graphic Win Size option to select the size of the AGP
aperture and the size of the GART (Graphics Address Relocation Table). The aperture is a
portion on the PCI memory address range dedicated for use as AGP memory address
space and the GART is a translation table that translates the AGP memory addresses into
actual addresses. The following options are available.
128MB
256MB
Boot Display Device [Auto]
The Boot Display Device BIOS option selects the display device the system uses when it
boots. The available options are listed below:
Auto
Page 164
NOVA-9152 and NOVA-9102 5.25" Motherboard
D
EFAULT
1MB of memory used by internal graphics device
D 8MB of memory used by internal graphics device
EFAULT
Default
D
EFAULT