Audio Kit Installation; Figure 5-19: Connect Atx Power Cable To Motherboard; Figure 5-20: Audio Kit Cable Connection - IEI Technology NOVA-9102 User Manual
Intel socket479 motherboard supporting intel pentium m and celeron m processors and both vga and dual lvds graphics output with dual pcie gbe, usb 2.0, sata and audio
Hide thumbs
Also See for NOVA-9102:
- Quick installation manual (16 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
NOVA-9152 and NOVA-9102 5.25" Motherboard
Figure 5-19: Connect ATX Power Cable to Motherboard
5.7.4 Audio Kit Installation
The Audio Kit that came with the NOVA-9152 and NOVA-9102 connects to the 10-pin
audio connector on the NOVA-9152 and NOVA-9102. The audio kit consists of three
audio jacks. One audio jack, Mic In, connects to a microphone. The remaining two audio
jacks, Line-In and Line-Out, connect to two speakers. To install the audio kit, please refer
to the steps below:
Step 1:
Locate the audio connector. The location of the 10-pin audio connector is
shown in Chapter 3.
Step 2:
Align pin 1. Align pin 1 on the on-board connector with pin 1 on the audio kit
connector. Pin 1 on the audio kit connector is indicated with a white dot.
Figure 5-20: Audio Kit Cable Connection
Step 3:
Connect the audio devices. Connect one speaker to the line-in audio jack, one
speaker to the line-out audio jack and a microphone to the mic-in audio jack.
Step 0:
Page 111
Advertisement
Table of Contents
