NOVA-9152 and NOVA-9102 5.25" Motherboard
Figure 5-21: Keyboard/mouse Y-cable Connection
Step 4:
Attach PS/2 connectors to the chassis. The keyboard/mouse Y-cable
connector is connected to two PS/2 connectors. To secure the PS/2 connectors
to the chassis please refer to the installation instructions that came with the
chassis.
Step 5:
Connect the keyboard and mouse. Once the PS/2 connectors are connected
to the chassis, a keyboard and mouse can each be connected to one of the
PS/2 connectors. The keyboard PS/2 connector and mouse PS/2 connector are
both marked. Please make sure the keyboard and mouse are connected to the
correct PS/2 connector.
5.7.6 Serial Port Connector Cable (Four Ports) Cable Connection
The NOVA-9152 and NOVA-9102 is shipped with one four serial port connector cable.
The four serial port connector cable connects four serial port connectors on the cable to
the 40-pin serial port connectors on the NOVA-9152 and NOVA-9102. To connect the four
serial port connector cable please follow the steps below.
Step 1:
Locate the serial port connector. The location of the 40-pin serial port
connector is shown in Chapter 3.
Step 2:
Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the NOVA-9152 and NOVA-9102 40-pin serial port connector. See Figure 5-21.
Step 3:
Insert the cable
the 40-pin serial port connector on the NOVA-9152 and NOVA-9102, connect
the cable connector to the on-board connectors. See Figure 5-21.
Step 0:
connectors.
Once the cable connector is properly aligned with
Page 113