Jumper Settings - IEI Technology NOVA-9102 User Manual

NOVA-9152 and NOVA-9102 5.25" Motherboard

5.5 Jumper Settings

NOTE:
A jumper is a metal bridge that is used to
close an electrical circuit. It consists of
two metal pins and a small metal clip
(often protected by a plastic cover) that
slides over the pins to connect them.
To CLOSE/SHORT a jumper means
connecting the pins of the jumper with
the plastic clip and to OPEN a jumper
means removing the plastic clip from a
jumper.
Before the NOVA-9152 and NOVA-9102 is installed in the system, the jumpers must be
set in accordance with the desired configuration. The jumpers on the NOVA-9152 and
NOVA-9102 are listed in Table 5-1.
Description
Clear CMOS
CF Card setting
CPU Frequency Selection
COM1 Port Mode Setting
COM2 Port Mode Setting
COM1 Pin-8 Function Setting
COM2 Pin-8 Function Setting
Jumper
Label Type
J_CMOS1 3-pin header
JCF1 2-pin header
J_FRQ1 3-pin header
JP1 6-pin header
JP2 6-pin header
J_COM_F1 3-pin header
J_COM_F2 3-pin header
Page 93