4-Com Port Adapter Board Connection (Optional) - IEI Technology NOVA-9102 User Manual
Intel socket479 motherboard supporting intel pentium m and celeron m processors and both vga and dual lvds graphics output with dual pcie gbe, usb 2.0, sata and audio
Hide thumbs
Also See for NOVA-9102:
- Quick installation manual (16 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
NOVA-9152 and NOVA-9102 5.25" Motherboard
inserted the DB-9 connectors should be secured to the chassis with retention
screws.Step 0:
5.7.12 4-COM Port Adapter Board Connection (Optional)
An optional, separately purchased 4-COM port adapter board may be shipped with the
NOVA-9152 and NOVA-9102. To install the 4-COM Port Adapter Board, please follow the
steps below.
Step 1:
Locate the COM connector. The locations of the COM port connectors are
shown in Chapter 4.
Step 2:
Insert the cable connector. Align the cable connector with the onboard
connector. Make sure the pin 1on the cable connector is properly aligned with
pin 1 on the board connector. Figure 5-30.
Step 3:
Connect the adapter board to the cable. The adapter board with the four COM
ports must then be attached to the cable. Make sure the cable connector is
properly aligned with the connector on the adapter board. Make sure the pin 1
on the adapter board connector and the cable connector are aligned. See
Figure 5-30.
Page 121
Advertisement
Table of Contents
