Phaeton 2003 ➤
6-cylinder injection engine - Edition 02.2014
– Pull supply hose -3- off Y-piece -2-. Then pull out both hoses
of suction-jet pump through right-hand sender opening.
– Now unclip suction-jet pump -3- on right side -B- and remove
by turning slightly.
– Now unclip fuel gauge sender -2- and it pull out.
1.9
Removing and installing fuel delivery
unit, fuel gauge sender and suction-jet
pump, left side
Special tools and workshop equipment required
♦ Wrench - 3087-
Test prerequisites
•
Fuel tank must be drained
•
Connectors and wires for left and right-hand sender flanges
have been removed.
•
Locking rings for left and right sender flanges have been re‐
moved.
•
Fuel pump relays have been removed from fuse box.
134
Rep. gr.20 - Fuel supply system
⇒ page 128
, Draining fuel tank.