Table of Contents
Advertisement
1 - Ignition coil with output
stage - N70, N127, N291,
N292, N323, N324-
❑ Removing and installing
⇒ page 182
2 - Connector
❑ 4-pin.
❑ Use assembly tool -
T10118- to pull off.
3 - Bracket
❑ For connector for knock
sensor 1 - G61- .
4 - 10 Nm
5 - Connector
❑ Black, 3-pin
❑ Gold-plated contacts on
sensor and connector.
6 - Knock sensor 1 - G61-
❑ Gold-plated contacts on
sensor and connector.
❑ Location: cylinder block
exhaust side
7 - 20 Nm
❑ The torque setting influ‐
ences the function of the
knock sensor.
8 - Exhaust camshaft adjuster
❑ With sender wheel for
Hall sender 2 - G163-
❑ Installing
⇒ page 64
9 - Cover
❑ Removing and installing
10 - Seal
❑ Renew
11 - Hall sender 2 - G163-
❑ For exhaust camshaft.
❑ Gold-plated contacts on sensor and connector.
12 - 10 Nm
13 - Connector
❑ Black, 3-pin
❑ Gold-plated contacts on sensor and connector.
❑ Mark connector before removing.
14 - Hall sender - G40-
❑ For inlet camshaft.
❑ Gold-plated contacts on sensor and connector.
15 - Knock sensor 2 - G66-
❑ Gold-plated contacts on sensor and connector.
❑ Fitting location: cylinder block intake side
16 - Connector
❑ Black, 2-pin
.
⇒ page 71
6-cylinder injection engine - Edition 02.2014
Phaeton 2003 ➤
181
1. Ignition system
Advertisement
Table of Contents
