Table of Contents
Advertisement
– Remove lower bolts -arrow- of suspension struts.
– Loosen bolted connection -1- and pull upper suspension links
-2- off wheel bearing housing -3-.
– Separate track rod ends -4- of steering.
Removing engine and gearbox with subframe
Removing engine and gearbox without subframe
Prepare scissor-type assembly platform - VAS 6131- for further
procedure
– Install engine supports -VAS 6131/3-1- -1- left and -
VAS 6131/3-2- -2- right on scissor-type assembly platform -
VAS 6131- .
– The arrows on the supports point in direction of travel.
– Secure the bolts in the following positions: left engine support
-1-: C6 and D5; right engine support -2-: E6 and F5.
– The universal supports - VAS 6131/1-3- for the subframe and
the universal supports - VAS 6131/1-4- for the gearbox con‐
sole have a longitudinal hole in the diagonal direction and
should be installed depending on the situation.
– Remove both middle gearbox console bolts -arrows-.
– Position assembly platform under power unit. The engine sup‐
ports must be guided into their respective mountings:
A - Mounting on left of engine -arrow-
6-cylinder injection engine - Edition 02.2014
⇒ page 11
.
Phaeton 2003 ➤
1. Removing and installing engine
9
Advertisement
Table of Contents
