Table of Contents
Advertisement
Phaeton 2003 ➤
6-cylinder injection engine - Edition 02.2014
– Remove old sealant from 3 mm holes in cylinder head gasket
-arrows-.
– Fill 3 mm holes in cylinder head gasket -arrows- with sealant
- D 176 501- and coat sealing surface on cover part and seal‐
ing flange with sealant - D 176 501- .
– Install cover immediately!
– First insert all securing bolts and tighten lightly.
– Then tighten M8 securing bolts
and M6 securing bolts to 8 Nm.
– Install chain tensioner for camshaft roller chain
⇒ Item 7 (page 72)
and tighten to 40 Nm.
1.8
Checking compression
Special tools and workshop
equipment required
♦ Puller - T10095 A-
♦ Assembly tool - T10118-
♦ Spark plug socket and ex‐
tension - 3122 B-
♦ Torque wrench (5...50 Nm)
- V.A.G 1331-
♦ Compression tester -
V.A.G 1763-
74
Rep. gr.15 - Cylinder head, valve gear
⇒ Item 15 (page 72)
to 23 Nm
Advertisement
Table of Contents
