Table of Contents
Advertisement
Phaeton 2003 ➤
6-cylinder injection engine - Edition 02.2014
– Remove bolts -1- for engine carrier.
Vehicles with manual gearbox
– Lower assembly platform with engine and gearbox until se‐
lector mechanism can be unbolted: ⇒ 6-speed manual gear‐
box 01E/0A1; Rep. gr. 34 ; Repairing selector mechanism;
Removing and installing selector mechanism .
Vehicles with automatic gearbox
– Lower assembly platform with engine and gearbox only
enough so as to facilitate unhooking of the selector lever cable.
Continuation for all vehicles
– Check that all connections between bulkhead and engine
have been separated.
– Remove engine and gearbox downwards.
Note
The engine has to be guided carefully when removing to prevent
damage to the bodywork.
1.2
Securing engine on engine and gearbox
support - VAS 6095-
Secure engine to engine and gearbox support - VAS 6095- to
carry out repairs.
Procedure
Note
Separate engine and gearbox ⇒ Operating instructions for scis‐
sor-type assembly platform VAS 6131 .
– Unbolt gearbox.
Vehicles with automatic gearbox
– Secure torque converter against "falling out" after separating
engine from gearbox.
Continuation for all vehicles
– Connect lifting tackle - 3033- as shown:
Vibration damper end: position 3.
14
Rep. gr.10 - Removing and installing engine
Advertisement
Table of Contents
