Assembly Overview - Dismantling And Assembling Oil Filter Housing - Volkswagen Phaeton 2003 Workshop Manual

Phaeton 2003 ➤
6-cylinder injection engine - Edition 02.2014
1.2.2 Removing and installing oil non-return
valve
Removing
– Screw commercially available M8x1.5 bolt about 4 full turns
into valve -arrow- and withdraw it from bore.
Installing
– Before installing, moisten O-ring with oil. Press valve into oil
channel by hand.
1.2.3 Markings on oil dipstick
1 - Max. mark
2 - Min. mark
a - Area above hatched field up to max. mark: do not add engine
oil
b - Oil level within hatched zone: engine oil can be added
c - Area from min. mark up to hatched field: Must be topped up,
max. 0.5 l of engine oil!
1.3

Assembly overview - dismantling and assembling oil filter housing

98
Rep. gr.17 - Lubrication