Table of Contents
Advertisement
Phaeton 2003 ➤
6-cylinder injection engine - Edition 02.2014
Test prerequisites
•
Fuel tank must be drained
•
Fuel pump relays -1- and -2- must be removed from their
sockets.
Removing
– Note safety precautions before beginning work
– Remove rear bumper: ⇒ General body repairs, exterior; Rep.
gr. 63 ; Removing and installing rear bumper
– Remove rear right wheel housing liner: ⇒ General body re‐
pairs, exterior; Rep. gr. 66 ; Removing and installing wheel
housing liner
– Remove centre and rear silencers
– Remove propshaft ⇒ Transfer box and final drives; Rep. gr.
39 ; Removing and installing propshaft .
– Remove rear axle ⇒ Running gear; Rep. gr. 42 ; Removing
and installing rear axle .
– Open fuel tank filler flap.
– Unscrew securing bolt and remove tank flap unit with rubber
cup.
– Remove filler neck securing bolts
– Disconnect breather line -1-.
– Remove securing bolt -3- for breather tank -2- and pull it out
of mounting in inner wheel housing -arrows-.
– Unclip both covers for sender flanges in luggage compartment
floor.
– Pull connector -arrows- off right sender flange.
138
Rep. gr.20 - Fuel supply system
⇒ page 128
, Draining fuel tank.
⇒ page 128
⇒ page 172
⇒ Item 32 (page 122)
.
.
Advertisement
Table of Contents
