Volkswagen Phaeton 2003 Workshop Manual page 105

1 - Oil filter housing/engine
bracket
2 - Seal
❑ Renew
3 - Oil cooler seal
❑ Insert in oil cooler before
installing ⇒ page 99
❑ Renew
❑ Lubricate before instal‐
ling.
4 - Oil cooler
❑ Ensure clearance to ad‐
jacent components.
❑ See note ⇒ page 95
❑ Coolant hose schematic
diagram ⇒ page 114
5 - Securing ring
6 - Seal
❑ Renew
❑ Lubricate before instal‐
ling.
7 - Oil cooler cover, 25 Nm
8 - Oil pressure switch - F1- ,
20 Nm
❑ Black
❑ If seal is leaking, nip
open and renew
❑ Checking ⇒ page 104
9 - Oil filter element
❑ Observe change inter‐
vals.
❑ See note ⇒ page 95
10 - Oil filter lower part, 25 Nm
❑ Before removing, drain via oil drain plug
❑ With by-pass valve, opening pressure: 2.50 bar
11 - Oil drain plug, 10 Nm
12 - 23 Nm
Installing oil cooler seal
– Insert seal moistened with oil into oil cooler as illustrated.
When doing this note installation position -arrow-.
.
⇒ Item 11 (page 99)
6-cylinder injection engine - Edition 02.2014
Phaeton 2003 ➤
1. Parts of lubrication system
99