Enabling the RTP firewall in Avaya CU360
About this task
Configure Avaya CU360 to check the source of the received audio, video, and presentation (RTP
packets) to verify that the source matches the remote endpoint's IP address.
This configuration is available only if your administrator enabled the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
CU360 displays the Advanced window.
3. Click Calls > Preferences > IP.
4. Select Yes to enable RTP Firewall.
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings
Encryption field descriptions
Name
Accept Protected Calls
July 2020
on page 40
Description
The option to enable or disable encryption when receiving an encrypted
call.
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
Enabling the RTP firewall in Avaya CU360
Table continues...
83