Avaya CU360 Installing And Administering page 35

Name
Protocol Type
IP Address Mode
IP Address
Subnet Mask
Gateway
DNS
Use Gatekeeper
July 2020 Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
Configuration of Avaya CU360 basic settings
Description
The protocol that Avaya CU360 must use.
• H.323: Select this option to register Avaya CU360
to only a gatekeeper.
• SIP: Select this option to register Avaya CU360 to
only a SIP server. For redundant SIP-based
deployments, you can register the endpoint to
maximum three SIP servers.
• H.323 and SIP: Select this option to register
Avaya CU360 to a gatekeeper and a SIP server.
The selection of the protocol, such as SIP or H.323,
depends on the protocol that the enterprise network
uses.
The option to determine whether the IP address is
allocated dynamically using DHCP or designated a
static IP address.
Use static IP addresses for Avaya CU360 deployed
on:
• Public networks.
• SIP networks where the endpoint is secured using
TLS certificates and the certificate requests need
static IP addresses.
The static IP address.
If you do not enter a static IP address, this field
displays the allocated dynamic IP address.
The subnet mask associated with the static IP
address.
If you use dynamic IP addresses, this field displays
the allocated subnet mask.
The default gateway static IP address.
If you do not enter a static IP address, this field
displays the allocated dynamic gateway IP address.
The DNS server IP address.
Enter a valid IP address for web collaboration and
the cloud-based connection to Avaya Equinox
Management. If you do not enter a static IP
address, this field displays the allocated dynamic
DNS server IP address.
The option to choose whether Avaya CU360 is
registered to an H.323 gatekeeper.
®
Table continues...
35