Configuring Screen Link And Mobile Link In Avaya Cu360 - Avaya CU360 Installing And Administering

Configuring screen link and mobile link in Avaya CU360

About this task
You can configure the screen link and mobile link to share your desktop automatically.
When you connect your computer to Avaya CU360, by default Avaya CU360 requests you to enter
a PIN. You can disable the PIN request.
You can also configure how the Avaya CU360 endpoint can remove a connected screen link
client.
This configuration is available only if your administrator enabled the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
CU360 displays the Advanced window.
3. Click Utilities > Remote Access > Screen Link/Mobile Link.
4. Configure the following fields:
• Mode
• Remote Presentation Mode
• Screen Link Unpair Mode
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings
July 2020
on page 40
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
Configuring screen link and mobile link in Avaya CU360
127