Enabling The Use Of Ipv6 Addresses In Avaya Cu360 - Avaya CU360 Installing And Administering

Name
Audio Delay Automatic
Estimation
Delay

Enabling the use of IPV6 addresses in Avaya CU360

About this task
This configuration is available only if your administrator enabled the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
CU360 displays the Advanced window.
3. Click Networks > Preferences > General.
4. Click Use IPv6.
5. Select Yes to enable the IPv6 support.
6. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings
July 2020
Description
Improves the echo canceler performance and the audio delay
automatically when you connect a new monitor to Avaya CU360.
• Yes: Enables the echo cancellation performance automatically.
• No: Disables the automatic echo cancellation performance and you can
configure Delay manually for better performance.
Avaya CU360 estimates the audio delay introduced by the monitor.
You can calculate the audio delay in milliseconds and use the value to
calculate the audio delay and improve the echo cancellation performance.
on page 40
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
Enabling the use of IPV6 addresses in Avaya CU360
95