At Commands Field Descriptions - Avaya CU360 Installing And Administering

AT Commands field descriptions

AT Commands section
Name
AT Commands Management The option to enable or disable remote access to Avaya CU360 using AT
IP section
Name
Enable All Addresses
Address
Subnet Mask
SSH section
Name
Enabled
User Name
Password
July 2020
Description
commands through the TCP, SSH and RS232 serial ports.
The options are:
• No: Disables the remote access to Avaya CU360 using AT commands
through the TCP, SSH and RS232 serial port.
• IP only: Restricts the remote access to Avaya CU360 using AT
commands to only the TCP connection.
Description
The option to allow remote access to Avaya CU360 using AT commands
from all IP addresses or restrict the AT commands access to a specific
range of IP addresses.
The options are:
• Yes: Enables the remote access to Avaya CU360 using AT commands
from any IP address.
• No: Restricts the remote access to Avaya CU360 using AT commands
to a specific range of IP addresses. You can define the range of IP
addresses in Address and Subnet Mask.
The IP addresses of the devices that you allow to send AT command.
You can enter a value in this field only if you configure Enable All
Addresses to No.
The range of addresses that you allow to send AT command.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Description
The option to enable the AT commands API through SSH.
The user name for the SSH management.
The default user name is Admin.
The password for the SSH management.
The default password is 1234.
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
AT Commands field descriptions
123