Configuring Telnet In Avaya Cu360 - Avaya CU360 Installing And Administering

Advance administration
RS232 Serial Port section
Name
Always Initialized
Baud Rate

Configuring telnet in Avaya CU360

About this task
With telnet, you can control Avaya CU360 by using CLI commands.
This configuration is available only if your administrator enabled the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
CU360 displays the Advanced window.
3. Click Utilities > Remote Access > Telnet.
4. Configure the following fields:
• Telnet Management
• Enable All Addresses
• Address
• Subnet Mask
• Password
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings
July 2020
Description
The option to accept an AT initialization command before accepting other
commands, when required by the API.
Use this option when the controlling device cannot detect whether Avaya
CU360 restarted.
The baud rate of the devices that you allow to remotely gain access to
Avaya CU360.
The baud rate must be the same as the baud rate of the controlling
device.
on page 40
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
124