Configuring Advanced Wifi Network Connectivity In Avaya Cu360; Wi-Fi Parameters Field Descriptions - Avaya CU360 Installing And Administering

Configuring advanced WiFi network connectivity in Avaya
CU360
Before you begin
Enable the Avaya CU360 advanced settings and Avaya CU360 network priority.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
CU360 displays the Advanced window.
3. Click Networks > Wi-Fi > Parameters.
4. Configure MTU.
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings
Configuring network priority settings in Avaya CU360

Wi-Fi Parameters field descriptions

Name
MTU
July 2020

Configuring advanced WiFi network connectivity in Avaya CU360

on page 40
Description
The maximum size of data packets sent around the network.
The default MTU size is 1360.
If you transmit data packet of a larger MTU size, the network drops or
fragments the packet. To avoid packet loss or fragmentation, all network
components must use the same MTU size.
For IPv4 address, set the MTU size in the range of 576 through 1500.
For IPv6 address, set the MTU size in the range of 1280 through 1500.
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
on page 96
101