Form Length (Forml); Automatic Gap Adjustment (Aga) - Tally Dascom 2810 User Manual

Options and accessories

Form length (Forml)

The Formlen function allows you to set the basic form length to meet your
requirements. 11 inches are usual in the USA, as opposed to 12 inches in
Europe.
The value defined here is set in all five menus and for all paper paths. The setting
made here is not changed by loading the default (factory) settings by pressing all
four function keys; see section Key functions when turning on the printer.
Confirm the setting by pressing the Set (1) key.

Automatic gap adjustment (AGA)

This function allows you to switch the Automatic Gap Adjustment (AGA) off or on.
AGA=On: printer checks paper thickness and changes gap adjustment if
necessary (default). Measurements take place
– after power-on
– whenever changing the paper path, when loading paper
AGA = Off: selects manual gap adjustment; the value can be set for each paper
source and each of the five menus available.
98
Select the Forml menu (2).
Setting options: 12 or 11 Inch
Default setting: 12 inches for 220–240 V printers, 11
inches for 120 V printers
Select the AGA menu (3).
Setting options: Off/On
Default setting: On
User Guide