Banner Page (Banner); Ethernet Speed (Ethspeed) - Tally Dascom 2810 User Manual

User Guide

Banner page (Banner)

Specifies whether a banner page is to be printed out, when using the LPD/LPR
protocol.
Confirm the setting by pressing the Set key (1).

Ethernet speed (EthSpeed)

Specifies the transmission speed of the Ethernet interface.
Auto-Sense: The transmission speed is detected automatically.
10Mbit Half: Sets the transmission speed to 10 MBit half duplex per second.
10Mbit Full: Sets the transmission speed to 10 MBit full duplex per second.
100Mbit Half: Sets the transmission speed to 100 MBit half duplex per second.
100Mbit Full: Sets the transmission speed to 100 MBit full duplex per second.
It is recommended that the ethernet interface transmission speed setting of
the printer and the connected transmission device coincide. The printout of
the current menu settings contains the ethernet link status (item
EthConnected).
Confirm the setting by pressing the Set key (1).
Press the Next key (4) to leave the parameter group Interf.. Press the Next key
(4) again to access the next group of parameters.
Press Banner (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Yes/No
Default Setting: No
Yes: When using the LPD/LPR protocol a banner page will
be printed out in front of every print job, containing the file
name and the print queue name. The width of the banner
page is 8".
Press EthSpeed (3) key.
Setting Options: Auto-Sense, 10Mbit Half, 10Mbit Full,
100Mbit Half, 100Mbit Full
Default Setting: Auto-Sense
Options and accessories
71