Table of Contents
Advertisement
User Guide
Placing your printer
When selecting the printer location, observe the following additional instructions:
Never place the printer in the vicinity of inflammable gas or explosive
substances.
Do not expose the printer to direct sunlight. If you cannot avoid
placing the printer near a window, protect it from the sunlight with
a curtain.
When connecting the computer with the printer, make sure not to
exceed the permitted cable length (see Interface specifications).
Ensure sufficient distance between the printer and any heating
radiators.
Avoid exposing the printer to extreme temperature or air humidity
fluctuations. Above all take care to avoid the influence of dust.
It is recommended to install the printer in a place which is
acoustically isolated from the workplace because of the noise it
may produce.
Options and accessories
Place the printer on a solid, flat, surface,
ensuring that the printer is positioned in
such a way that it can not topple, and that
there is easy access to the control panel
and paper input devices. Also ensure that
there is sufficient space for the printed
output.
If you expect that frequent forward and
reverse feeds will occur, you should place
the printer as shown in the figure, if
possible.
The power supply cable may be
damaged if the paper edges
constantly chafe the insulating
sheath. The user must always
ensure that there is sufficient
distance between the power
supply cable and the paper.
13
Advertisement
Table of Contents
Need help?
Do you have a question about the 2810 and is the answer not in the manual?
Questions and answers