Activation Of Tractors (Autotra); Setting The Left Margin (Leftmrg) - Tally Dascom 2810 User Manual

User Guide

Activation of tractors (AutoTra)

This parameter only appears if at the optional tractor is installed. It regulates the
activation of tractors when there is no more paper left in one of them.
If an optional tractor is not installed, Off is displayed (factory default). If an
optional tractor is installed and the Off parameter is activated, only the selected
tractor is supported (either via the menu or an ESC sequence). If the selected
tractor is out of paper, printing stops.
If an optional tractor is installed and you select T1=T2, the printer will load paper
from the other tractor if the selected one is empty.
Confirm the setting by pressing the Set key (1). Press the Next key (4) to access
the next group of parameters.

Setting the left margin (LeftMrg)

The left print margin can be set to a fixed value.
Confirm the setting by pressing the Set key (1).
Press AutoTra (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Off/T1=T2
Default Setting: Off
Press LeftMrg (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 2–134/10"
Default Setting: 134/10"
The value may not fall below the RightMrg value.
Options and accessories
85