Further Settings (Special); Error Handling (Errmode); Block End Character (Blockend) - Tally Dascom 2810 User Manual

User Guide

Further Settings (Special)

This parameter subgroup only appears if the serial port is used and the
ENQ/STX, ETX/ACK or ACK/NAK protocol is activated.

Error handling (ErrMode)

On replaces the incorrect character with ?, Off deletes the entire block.

Block end character (Blockend)

End-of-block character definition; On: LF, FF, CR, VT, ETX, DEL; Off: ETX, DEL.
Confirm the setting by pressing the Set key (1). Press the Next key (4) to access
the next group of parameters.
Press Special (2) key.
Press ErrMode (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: On/Off
Default Setting: Off
Confirm the setting by pressing the Set key (1).
Press Blockend (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: On/Off
Default Setting: Off
Options and accessories
65