First Printing Position (Formadj) - Tally Dascom 2810 User Manual

User Guide
Sets the form length via line formats. Please note that the adjustment in Lines
depends on the selected LPI. For example 8 LPI at a selected line number of 96
lines results in a formlength of 12 inches (96 lines/[8lines/inch]) = 12 inches). The
selectable range is between 3 and 21 inches, i.e. for 2 LPI from 6 to 42 lines and
for 12 LPI from 24 to 262 lines.
If the form length is set it will not be changed by changing the LPI later on.
Confirm the setting by pressing the Set key (1).
Selects the form length by standard formats. Using Standard, different paper
formats can be selected directly, e.g. DIN A4, Legal, Letter.
The LC display indicates No Format if a value is selected by the Line function or
ESC sequences, which does not correspond to a standard format.
Confirm the setting by pressing the Set key (1).

First printing position (FormAdj)

Sets the first print position of a form in n/72 inch, separately adjustable for each
paper path. The settings made here reduce the height of the printable area.
If you wish to define the form length via a line format, press
Line (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 6 bis 144
Default Setting: 72
If you wish to define the form length via standard formats,
press Standard (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Fanfold 12", DIN A3, DIN A4, DIN A5,
DIN B5, DIN B6, Exective 10.5", Letter 11", Legal 14", No
Format
Default Setting: Fanfold 12"
Press FormAdj (3) key.
Options and accessories
77