Paper Handling (Paphand); Increasing The Printhead Gap (Head Up) - Tally Dascom 2810 User Manual

User Guide
Confirm the setting by pressing the Set (1) key. The printer automatically leaves
test mode and assumes online mode.

Paper handling (Paphand)

The Paphand group of menus improves the possibilities for the troublefree
printing of paper with properties likely to cause problems (perforations etc.) or
paper of poor finish.
Put the printer into Test mode by pressing the key Online while switching on the
printer. The display shows ASCII80 ASCII136. Change to the parameter group
Formlen AGA by pressing the key Next three times.

Increasing the printhead gap (Head up)

With this function you can increase the printhead gap before and after the
perforation of the form.
Select the Paphand menu (1).
Select the Head up menu (2).
Setting options: On/Off
Default setting: Off
If the parameter is set to On, the printhead gap increases
during form feed and line feed four lines before and after
the perforation on the form (= protected zone). The
printhead gap is always increased during form feeding past
the perforation even when feeding takes place outside the
protected zone.
Printing is possible in the protected area.
Confirm the setting by pressing the Set (1) key.
Options and accessories
99