Advanced Settings - Tally Dascom 2810 User Manual

Options and accessories

Advanced settings

In the advanced menu, there are other settings available besides the test
functions.
► With the function PMS you have the possibility of activating the automatic
► With the functon Forml you can adjust the form length.
► The function AGA switches the automatic printhead gap function on or off.
► You can also select adjustments which facilitate handling paper which may
► The CX-bid menu option controls the bidirectionality of the parallel interface.
► With the function Wrap, you can set line wrap and with the function Sound
► The function JobCtrl activates the PJL functionality.
► The function Pap.back allows printing on paper with a dark back.
► With the function GrSpeed, you can select an improved graphic speed.
► You can use the HvyForm function to set the print head to print the same line
► The APW function can be used to activate the automatic paper width
► The AED menu option only appears, if a cut device is installed. It corrects
► With the SerialN function, you have the possibility to change the serial
► With the AssetN function, you have the possibility to change the asset
► The Ignore function allows to ignore any character (to be defined in
► The IgnoreChr function set the character to be ignored as a decimal number.
94
paper motion sensor (PMS) in case of a paper jam.
cause problems in printing due to its structure (Paphand).
beep at paper end.
twice at double strike force in order to ensure that copy paper produces
optimum results even if it has a faint copying effect.
detection feature to prevent the printer from printing beyond the paper edge.
possible inaccuracies of the paper positioning at the tear edge if the paper
path is changed after a cutting action.
number of the printer.
number of the printer.
IgnoreChr).
User Guide