Slashed Zero (Sl.zero); Automatic Carriage Return (Auto-Cr) - Tally Dascom 2810 User Manual

User Guide

Slashed zero (Sl.Zero)

Selects if normal zero (0) or the slashed zero (Ø) is printed.

Automatic carriage return (Auto-CR)

Switches the automatic carriage return on or off after receiving the signal LF (line
feed).
Use the < (2) or > (3) key to select the desired setting.
Setting Options: See Available character sets and fonts.
Default Setting: E-US ASCII
Confirm the setting by pressing the Set key (1).
Press Sl.Zero (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Off/On
Default Setting: Off
Confirm the setting by pressing the Set key (1). Press the
Next key (4) to access the next group of parameters.
Press Auto-CR (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Off/On
Default Setting: On
Confirm the setting by pressing the Set key (1).
Options and accessories
73