Change The Country Or Region Of Operation - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual

Change the country or region of operation

You can change the country or region in which the access point operates. Note the
following:
• Make sure that the country is set to the location where the device is operating. You
are responsible for complying with the local, regional, and national regulations that
are set for channels, power levels, and frequency ranges.
• It might not be legal to operate the access point in a country or region other than
those listed in the menu. If your country or region is not listed in the menu, you must
check with your local government agency or check the NETGEAR website for
information about which channels you can use.
To change the country or region of operation:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 37.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
4. Select Management > Configuration > System > Basic.
The General page displays the basic system settings.
5. Select a country or region from the Country / Region menu.
6. Click the Apply button.
A pop-up warning window opens.
7. Click the OK button.
Manage and Maintain the Access
Point
143 User Manual