Unpack The Access Point; Top Panel With Leds - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual

Unpack the access point

The package contains the following items:
• WAX610 access point
• Mounting bracket with screw holes for mounting to a solid ceiling or 15/16 in.
(23.8 mm) T-bar
• Mounting bracket without screw holes for mounting to a 9/16 in. (14.3 mm) T-bar
• Two screws and anchors for ceiling mounting or wall-mounting
• Screw placement guide
• Installation guide
Note: Depending on the product ordered, the package might not include a power
adapter. You power up the access point by connecting it to a PoE+ switch. If you ordered
a package without a power adapter, you can still order a power adapter as an option.
For information about the mounting options, see Mount the Access Point on a Wall or
Ceiling on page 224.

Top panel with LEDs

The LEDs that provide the status of the access point are located on the top panel of the
access point.
Figure 1. Top panel with LEDs
Hardware Overview 11 User Manual