NETGEAR WAX610 User Manual page 12

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
Table 1. LED descriptions
LED Icon
Power/Cloud LED
LAN LED
Hardware Overview
Color Description
Solid amber initially and then blinking amber slowly. The access
point is starting or in the process of getting an IP address.
Solid green. The access point started up and functions either as a
standalone access point or as an Insight discovered access point that
is not connected to the Insight cloud-based management platform.
Solid blue. The access point functions in Insight mode and is
connected to the Insight cloud-based management platform.
Blinking amber fast. The access point is updating firmware or is
being reset to factory default settings.
Blinking multicolor. The access point is functioning in extender mode
and the mesh setup is in progress.
Solid amber during operation. The PoE power that the access point
received is not at the 802.3at (PoE+) level.
Off. No power is supplied to the access point.
Solid green. A 2.5 Gbps Ethernet link is detected on the LAN port.
Blinking green. 2.5 Gbps traffic activity is detected on the LAN port.
Solid amber. An Ethernet link at a speed lower than 2.5 Gbps is
detected on the LAN port.
Blinking amber. Traffic activity at a speed lower than 2.5 Gbps is
detected on the LAN port.
Off. Either no powered-on Ethernet device is connected to the LAN
port, or, if a powered-on Ethernet device is connected, no Ethernet
link is detected.
12 User Manual