Install The Netgear Insight App To Manage An Insight Instant Mesh Wifi Network - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
The following NETGEAR access point models can function either as a root access point
or as an extender access point:
• WAX610
• WAC564
• WAC540
Note: In a mesh WiFi network with WAX610, and WAC564, and WAC540 models, the
WAC564 and WAC540 models must run firmware version 9.0 or a later version.
In the near future, more NETGEAR models might be added to this list.
Install the NETGEAR Insight app to manage
an Insight Instant Mesh WiFi network
Before you can add the access point to an Insight Instant Mesh WiFi network, you must
install the NETGEAR Insight app on an iOS or Android mobile device.
For more information about the Insight app, visit netgear.com/insight and
netgear.com/support/product/Insight.aspx. For knowledge base articles about NETGEAR
Insight, visit netgear.com/support.
To install the Insight app:
1. On your mobile device, go to the app store, search for NETGEAR Insight, and
download the Insight app.
2. Open the Insight app.
3. If you do not have a NETGEAR account, tap Create NETGEAR Account and follow
the onscreen instructions.
4. Enter the email address and password for your account and tap LOG IN.
You can now set up the access point mesh WiFi connection (see Connect the access
point as an extender to a root access point on page 45).
Install the Access Point in an
Insight Instant Mesh WiFi
Network
44 User Manual