NETGEAR WAX610 User Manual page 125

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
The Dashboard page displays.
4. Select Management > Configuration > Security > RADIUS Settings.
5. For each RADIUS server that you want to set up, configure the following settings:
• IPv4 Address. Enter the IPv4 address of the RADIUS server. The access point
must be able to reach this IP address.
• Port. Enter the number of the UDP port on the access point that is used to access
the RADIUS server. For authentication servers, the default port number is 1812.
For accounting servers, the default port number is 1813.
• Password. Enter the password (shared key) that is used between the access point
and the RADIUS server during the authentication or accounting process. By
default, the password is sharedsecret.
6. Configure the following authentication settings, which apply to all RADIUS server
that you set up:
• Reauthentication time. Enter the interval in seconds after which the supplicant
(the WiFi client) must be reauthenticated with the RADIUS server. The default
interval is 3600 seconds (1 hour). Enter 0 to disable reauthentication.
Manage Access and Security 125 User Manual