Manage The Firmware Of The Access Point - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
4. Select Management > Configuration > System > Advanced > Syslog.
5. Specify the IP address and port number for the syslog server:
• Syslog Server IP Address. Enter the IP address of the syslog server on your
network.
• Port Number. Enter the port number at which the syslog can be reached. By
default, the port number is 514.
6. To enable the syslog server function, select the Enable Syslog check box.
7. Click the Apply button.
Your settings are saved.

Manage the firmware of the access point

The access point firmware is stored in flash memory.
You can check to see if new firmware is available and upgrade the access point to the
new firmware. You can also visit the NETGEAR support website, download the firmware
manually to a local computer, and update the access point to the new firmware. If
someone (usually the network administrator) places new firmware on a secure FTP (SFTP)
server in the network, you can load the firmware from the server and upgrade the
firmware of the access point.
The following sections describe the firmware management methods:
• Check for new firmware and upgrade the access point
• Manually download firmware and upgrade the access point
• Revert to the backup firmware
• Use an SFTP server to upgrade the access point
Manage and Maintain the Access
Point
149 User Manual