NETGEAR WAX610 User Manual page 234

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
Table 3. Factory default settings (Continued)
Feature
Basic radio settings that apply to all WiFi networks (SSIDs or VAPs)
Radio broadcast
WiFi mode
Channel width
Guard interval
Output power
Channel
Wi-Fi Multimedia (WMM)
WMM Powersave
Advanced radio settings that apply to all WiFi networks (SSIDs or VAPs)
Number of WiFi clients
RTS threshold
Beacon interval
802.11n 256 QAM
MU-MIMO
DTIM interval
Broadcast and multicast
rate limiting
802.11h
Load balancing between
radios
Factory Default Settings and
Technical Specifications
Default Setting
2.4 GHz radio: Enabled
5 GHz radio: Enabled
2.4 GHz radio: 11ax mode, which also supports 11b, 11bg, and 11na
5 GHz radio: 11ax mode, which also support 11a, 11na, and 11ac
2.4 GHz radio: Dynamic 20 / 40 MHz
5 GHz radio: Dynamic 20 / 40 / 80 MHz
2.4 GHz radio: Long-800 ns
5 GHz radio: Long-800 ns
2.4 GHz radio: Maximum (100%)
5 GHz radio: Maximum (100%)
2.4 GHz radio: Auto
5 GHz radio: Auto
2.4 GHz radio: Enabled
5 GHz radio: Enabled
2.4 GHz radio: Enabled
5 GHz radio: Enabled
2.4 GHz radio: 200 default (also the maximum number)
5 GHz radio: 200 default (also the maximum number)
2.4 GHz radio: Enabled at 2346
5 GHz radio: Enabled at 2346
2.4 GHz radio: 100 millisec.
5 GHz radio: 100 millisec.
2.4 GHz radio: Disabled
5 GHz radio: Nonconfigurable
2.4 GHz radio: Enabled
5 GHz radio: Enabled
2.4 GHz radio: 2 sec.
5 GHz radio: 2 sec.
2.4 GHz radio: Enabled with a limit of 50 pps
5 GHz radio: Enabled with a limit of 50 pps
2.4 GHz radio: Not applicable
5 GHz radio: Disabled
Disabled
234 User Manual