NETGEAR WAX610 User Manual page 38

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
• Mozilla Firefox. If Mozilla Firefox displays a Your connection is not secure message,
click the ADVANCED button. Then, click the Add Exception button. In the pop-up
window that opens, click the Confirm Security Exception button.
• Microsoft Internet Explore. If Microsoft Internet Explorer displays a There is a
problem with this website's security certificate message, click the Continue to this
website (not recommended) link.
• Microsoft Edge. If Microsoft Edge displays a There is a problem with this website's
security certificate message or a similar warning, select Details > Go on to the
webpage.
To log in to the access point's local browser UI:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message,
see the information in the introduction to this task.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
The following figure shows the upper part of the Dashboard page.
Install the Access Point in Your
Network and Access It for Initial
Configuration
38 User Manual